Conflow Airline Respirator
Constant Flow Airline Respirators are designed to maintain a slight positive pressure of air inside the facepiece whether the wearer is inhaling or exhaling. This helps prevent contaminants from seeping in around the facepiece, even if there should be small breaks in the face-to-facepiece seal. The complete respirator assembly is available with either an Ultravue full facepiece, Comfo half-mask respirator, Comfo Elite half-mask respirator or PVC hood. A breathing tube, support belt and air-flow control valve with quick-disconnect assembly. The Constant Flow Respirator is used in non IDLH environments.

Cavair Light Duty Air Line Breathing Apparatus
The Cavair light duty compressed airline equipment is versatile and comfortable, combining performance and ergonomics to be one of the most versatile constant flow devices available from MSA.

Airline Trolleys
Ideal for any situation where portable supplied air through airlines is required, such as tank cleaning, manhole entry, tunnels, live gas environments, asbestos removal or work in the petrochemical, shipping and public work sectors. If an airline trolley is required, MSA has 1 and 2 man configurations with multiple cylinder arrangements that can be tailored to meet industry or application specific requirements.

Comfo Elite II Respirators
The Comfo Elite II respirator uses a wide, contoured face piece that distributes pressure evenly over the face to ensure daylong comfort. The textured face seal reduces mask slippage on the face to provide consistent protection. The large exhalation valve reduces exhalation effort whilst the twin inhalation ports provide superior filter balance and lower inhalation resistance.

Comfo II Respirators
The Comfo II respirator uses a contoured face piece that provides a high degree of comfort. The special face piece material is designed to give excellent chemical resistance whilst still being robust. The mask provides easy breathing through large inhalation and exhalation ports. The cradle headband is easy to adjust and provides daylong comfort.

Advantage 200 Respirator
Lightweight, flexible and extraordinarily comfortable, the Advantage 200 respirator sets new boundaries for half face respirators. One of the lightest respirators available, the Advantage 200 has a wide sealing surface with a soft pliable feel for superb comfort. The mask is contoured to maximise the wearer's vision making it compatible with spectacles, goggles and faceshields.

Flexi-Filter Pads For Advantage Respirators
These low profile, flexible pads fit easily under welding hoods and face shields. They offer great balance and weight distribution for maintaining a good face seal, while the swept back design provides improved vision and comfort. Finger tabs provide easy installation and prevent possible filter damage. Flexi filter pads are rated as P2 dust, mist and fume particulate filters and as such are suitable for protection against mechanically and thermally generated particulates such as silica, coal dust, welding, grinding and foundry operations.

Product Number : 2056700L Ultra elite full face piece rubber
Product Number : 2056718L Ultra elite full-face piece silicone

3S Facepiece
The 3S full-face piece provides rugged reliability for people working in environments where toxic gases, vapors and dusts are found. The face piece is available in either chemical resistant rubber or soft silicone. The polycarbonate lens provides impact and chemical resistance.

Twin Filter Adapter
Both the Ultra Elite and 3S can use the Maxi filter range where lower gas/vapor concentrations are found and lightweight is preferred by using the Twin filter adapter. The Maxi filters screw into the adapter which is attached to the centre filter port.